"From the point of machinery industry in the first half of the operation, at the beginning of our predictions are correct, automobiles, electrical appliances growth is slowing, but other divisions skyward, makes the stability to the good trend is more obvious in the first half of the industry, the main economic indicators also grew more than expected, confidence in the market gradually improve, efficiency improvement, the export recovery, structural optimization and transformation development power boost."
On Aug. 8, China machinery industry federation at a mechanical industrial operation of the information in the first half of 2017 conference, China machinery industry federation, executive vice President Chen and vice Dong Yang to attend the conference, executive vice President and secretary general Zhao Chi presided over the conference.
The sub-sectors are fully integrated
Chen pointed out that the growth rate of the added value of the machinery industry has continued to be higher than the national industrial and manufacturing growth rate since the beginning of this year, and the growth rate has always been above 10 percent.
From January to June, the added value of the machinery industry increased by 10.9% year-on-year, respectively, compared with the national industrial and manufacturing industries and manufacturing industries of 4 and 3.5 percentage points respectively, compared with 3.1 percentage points in the same period in the machinery industry.
In addition, the main business revenue of the machinery industry in January and June was 12.51 trillion yuan, up 11.6% year on year, up from 4.92 percentage points a year ago.
The total profit was 85.76 billion yuan, an increase of 14.69 percent year on year, compared with 8.16 percentage points a year ago, and the main benefit indicators of the machinery industry showed a positive trend.
"In the first half of the year, 94 of the 119 major products monitored by the machinery industry were up year-on-year, which is very representative, compared with only 60 last year," Chen stressed.
In his view, the product production growth has the following characteristics: one is closely associated with consumer products such as automobile, motorcycle, digital camera, and associated with consumer products processing of plastics processing special equipment, cotton processing machinery, agricultural products processing machinery, parking equipment, and other products production are implemented faster growth.
Second, the production of environmental monitoring special instruments, water pollution prevention and control equipment, solid waste treatment equipment and other products are rapidly increasing.
Third, the growth of industrial automatic instruments, control systems and testing machines, which are related to the transformation and upgrading of the intelligent manufacturing industry, are in good shape.
Fourth, the production of engineering machinery related to infrastructure construction has grown significantly. The output of 10 major products in the first half of the year has been increasing year-on-year, in which excavators have increased by more than 70% year-on-year.
Five is the national key project drive related products production growth, such as transmission channel construction projects and drive the transmission on a new round of rural power grid upgrading project related products production to achieve faster growth.
The reporter learns that, with last year only automobile, electrician electric appliance two big industry pull mechanical industry growth is different, this year mechanical industry each branch industry shows to good development situation.
Such as 1 ~ 6 month in addition to the automotive industry, agricultural machinery, internal combustion engine, engineering machinery, instruments and meters, petrochemical general, heavy mining, machine tools, common base and main business income of food packaging machinery industry to achieve double-digit growth.
In the whole industry, the proportion of automobile and electrician appliances is about 55%, compared with 70% to 80% in the past few years.
The same is true of new profits, which accounted for about 90 per cent of profits last year, compared with 39.16 per cent in other sectors this year, up from 53 per cent.
Chen said the machinery industry services for investment service industry and energy industry, affected by the macroeconomic environment change is bigger, with the acceleration of market demand structure, under the guidance and support of relevant national industrial policy, a lot of mechanical enterprise active response, as a positive, through technical innovation, model innovation explore new kinetic energy, seek new development, the industry transformation development power boost.
The first is the development of major equipment localization.
Only in the first half of this year in the field of nuclear power have hualong number one nuclear reactor pressure vessel hydrostatic test a success, hualong 1 e K1, a kind of heat shrinkable casing (nuclear class cable accessories), nuclear power plant electrical throughout new pieces, CAP1400 main feed water regulator, CAP1000 / CAP1400 nuclear power plant containment built-in refueling tank filter and recycle filter prototype arriving by products such as identification.
It is particularly noteworthy that the private enterprises are playing an increasingly important role in the process of the localization of the major equipment, which is characterized by its flexible mechanism and strong innovation ability.
Second, actively explore innovative development models.
In the context of weak traditional market demand and intensifying competition, more and more mechanical enterprises are actively exploring innovative development modes.
Shen drum group continues to expand the scope of "shen gu yun" service;
Shaanxi drum group proposed the concept of energy interconnection island and positioned itself as the regional energy interconnection system solution provider.
Third, smart manufacturing starts gradually.
The machinery industry has undertaken about 46 per cent of projects in the pilot demonstration project of smart manufacturing new models arranged in the last three years.
Fourth, the expansion of service sector has obvious effect on the transformation and development.
Such as chery new energy Automobile co., LTD. And Chongqing Changan Automobile Company Limited joint qixin cheung mechanical and electrical co., LTD., jiangsu in Automobile lightweight, high strength composite materials processing key technology and equipment research and development, the development of the enterprise from the traditional field of Automobile manufacturing to the materials and equipment manufacturing;
Qinhuangdao qi2 CNC machine tool company has developed the rail milling equipment and control system for rail maintenance in order to develop the booming rail transit market.
Pinggao group has developed a high - end dc circuit breaker for rail transit.
Conflict of opportunity
During the meeting, the media had a strong interest in the rapid growth of the engineering machinery industry.
In response, Chen thinks, engineering machinery product cycle is 78 or so commonly, in 2011, is a peak period of the development of engineering machinery, so the growth is a factor from the industry development cycle.
In addition, because the two countries in three policy factors, together with the drive of the infrastructure construction and urbanization construction and execution of national strategy of "area", construction machinery industry is still expected to maintain a certain growth rate.
"To emphasize that the current growth is still a restorative growth, even more than 70% year-on-year growth in the first half of the excavator, month sales more than Taiwan, compared with 2011 peak in sales of 42900 units, there is still no comparability."
Chen said that there are still many contradictions and difficulties in the operation of the machinery industry, such as the lack of obvious improvement in the demand for steel, power, coal, chemical and petroleum industries.
The industry belongs to the old traditional industry, the transformation and upgrading is difficult, and the integration of the two integration has a long way to go;
It is still difficult for some large state-owned enterprises to operate in a completely competitive industry.
Cost pressures are still high.
But at the same time, we should also see that the above traditional demand areas, under the guidance of supply-side structural reform, optimize the stock and upgrade, and provide new opportunities for the machinery industry.
In addition, the growth of demand in the consumer sector also provides a new space for the machinery industry.
Based on that, Chen said that while the auto and electrician industries will see slower growth in 2017, the rest of the industry will be better off than last year.
Considering the factors of higher base in the second half of last year, is expected full-year machinery industrial added value growth around 8%, main business revenue and profit growth of about 8% of the total foreign trade exports is expected to end for two consecutive years of decline, year-on-year growth from negative to positive.